Posts Tagged ‘Datalogic’

Rugged, highly connected Cobalt C0405 RFID integrated controller/antenna bring fast and low cost RFID to the factory floor. The C0405 offers direct serial connectivity and network connectivity via Datalogic’s series of Gateways. The microprocessor architecture used by all C-Series family products accommodates advanced automation features such as C-Macro™, plug’n'play hardware replacement and modular system expansion. Industrial M12 connectors ensure trouble free operation inside the industrial environment for manufacturing applications such as machine control, work-in-progress and other factory automation applications.

FEATURES & BENEFITS

• COBALT HF family architecture including C-MACRO™ command software for easy integration with industrial control systems.
• Rugged M12 Connectors and industrial design assure protection from moisture and dust in harsh environments.
• Easy to read LED indicators provide helpful diagnostics.
• Advanced electronics permit longer read/write distance, and reduced sensitivity to the proximity of metal in the field for higher performance in difficult environments.
• C-Macro™ command software, and advanced micro-processing reduce network traffic between reader and host Integrated controller/antenna design eliminates cabling restrictions for easier installation.
• Plug ‘n’ Play allows effortless installation of additional Cobalt controllers on a network.
• Multi-tag firmware allows groups of tags to be read in the same field at the same time.

APPLICATIONS
This product series has been developed to satisfy to requirements of the following reference applications:

• Automated pharmaceutical
• Packaging machines
• Electronics manufacturing
• Hard disk drive manufacturing
• Work-in-progress
• Tool tracking

For more information, here is the Cobalt Datasheet or for other solutions check out the RFID Product Guide.

Ulyxe lasers, 6W@1064nm, belong to the category of DPSS Active Q-Switched lasers. This family is extremely compact (only 42cm, 16.5”) but offers all the most advanced technological concepts. Ulyxe family provides the best price/performance ratio in the laser marking world. Thanks to its cost-effectiveness and competitive positioning together with its immediate use, the Ulyxe family becomes the first choice in marking solutions even when compared with traditional marking techniques. Thanks to its extreme compactness, this laser family represents the ideal laser marking solution both in stand-alone configurations as well as in industrial production lines.

THE ALL-IN-ONE LASERS

The air cooled laser sources offer an ultra-compact design and include the scanning head, digital control and monitoring functions. The whole units are equipped with a specifically designed high-tech case, available in different materials (polyurethane and metal) depending on different application requirements.
The operator can easily interact and monitor the most important laser status and functions with an user friendly LCD/touch screen control display.
This compact laser family is available in 2 different configurations – Ulyxe and Zeux.
Ulyxe perfectly combines compact dimensions with USB connection ease, and the user-friendly Ulyxe Editor software, specifically developed to offer all key marking functions.
Zeux offers great compactness and full compatibility with the new marking platform (iMARKPCI board and Lighter software).

Options:

• Remote LCD with touch screen
• Second beam focus pointer
• Power supply
• Basic or Evo control box

For more information, here is the ULYXE Brochure & ULYXE User Manual or the Laser Marking Product Brochure

Now Available the New Industrial Laser Scanner DS4800 Subzero Model.

With the DS4800 Subzero, Datalogic Automation extends its product offering completing the 4K family of scanners. The 4K line was designed for the Factory Automation market, including Shop Floor and Automatic Warehousing applications. The DS4800 Subzero can operate in low temperature environments (down to -31 °F).

This new model is equipped with an integrated heating system which constantly monitors and automatically controls the internal temperature, heating only the necessary temperature-sensitive components and thereby keeping them functioning within their designed operating range even though the outside temperature is below normal operation range. This results in very low power consumption.

Features:

• Smart Focus adjustment for flexible reading area selection
• DIGITECH™ technology allows excellent reading performance
• Intuitive X-PRESS™ interface provides easy scanner setup
• ACR4™ reconstruction technology improves reading of damaged barcodes
• Multi-language Genius™ Sw Tool allows rapid scanner configuration
• ID-NET™ embedded interface for high-speed communication network
• Multi-language display improves scanner monitoring and diagnostic
• Total ambient light immunity thanks to the high frequency laser modulation
• IP65 rugged industrial housing

For more information, here is the DS4800 Data Sheet

The Datalogic SVS2 Vision Sensor Series presents all the characteristics able to solve artificial machine vision applications in a flexible and intuitive way.

SVS2 is a completely embedded device: the optic, the red LED illuminator and the electronics are included in an extremely compact housing. The sensor is configured via PC through Ethernet communication. The configuration software is included in the product and it has been developed in order to lead the customer through the configuration process step by step. SVS2 is available in two different versions according to the installed control tools: Object Recognition (OBJ) and Advanced Object Recognition (AOR). Many different control typologies are available: brightness, contrast, position, width, count, pattern match, contour match, 360° pattern match.

Highlights: Flexible and intuitive setup via PC through Ethernet • Memorisation of 20 inspections • 8 different controls • 360° pattern match for Advanced models • Logical operators: AND, OR, NOT, NAND, NOR, etc. • TURBO mode to double elaboration speed • Inspection results available on Ethernet communication for Advanced models.

Software: Image Setup,  the first step consists in connecting the sensor and configuring the image quality parameters. When the desired results are obtained, the user can memorize the image that will be used as a template during sensor functioning. Teach Function, the second step establishes the acceptance criteria to distinguish objects from wastes. One or more controls can be selected according to the task to carry-out. Run Function, the third step configures the sensor digital outputs, simulates sensor functioning on the PC to verify the controls chosen and activates the operating phase on the sensor using the PC only to control the diagnostics.

Applications: SVS2 is ideal for the control of text presence in overprinting and logo position on food packages, product completeness before packaging, logo position on cosmetic bottles, correct stamp on post envelopes, liquid level inside a plastic bottle, correct product orientation on a conveyor belt.

For further details please check out the SVS2 Data Sheet